High Resolution Stepper Motor Driver For NEMA 8, 11, 14, 17,23

1. The corresponding colors of different motors are different. Please refer to the motor data instructions when using.
2. driver can only drive two-phase hybrid stepping motors, but not three-phase and five-phase stepping motors.
3. The method of judging whether the stepping motor is connected in series or in parallel is correct: directly rotate the shaft of the motor by hand without connecting to the drive. If it can rotate easily and evenly, it means that the wiring is correct. If there is greater resistance and Unevenness and a certain sound indicate that the wiring is wrong.

1. Description:

• Supply power voltage:DC12-36V(Max),Output:0.2A-2.2A
• Current control: PID algorithm ,high speed and high torque output, low vibration ,low noise,low heating
• Running current: 16 different current levels selectable
• Control mode:Pulse +direction &Double pulse
• Self Test
• Protection: over voltage,under voltage, over current,open motor winding
• Current reduce helt after 1 second when stop
• Can startup 4 /6/8 lines stepper motors
• High microstepping, 16 different microstepping levels selectable:200,400,800,1600,3200,6400,12800,25600,1000,2000,4000,5000,8000,10000,20000,25000step/rev

2. Specification:

3. Dimension:MM

4. Motor Diagram
 

5. Control signal connection

6. Swith selecting

Current setting:                                                                                          Microstepping setting:
                        

7. Terms of trade